Workspaces, Collections and stuff

roddratt
Guest

Workspaces, Collections and stuff Oct 17, 2008 15:37:31 GMT -5

Quote

Post by roddratt on Oct 17, 2008 15:37:31 GMT -5

I was just scrolling thru this thread again, this is the coolest thread on here...I just love Steve's heater, that's so great, I had an in-wall air conditioner installed in my garage to cool it off to a reasonable temp so I can stand to be in there in the hot weather down here (most months except maybe December-March).

RodBurNeR
TRaKMaster

Rev. Mr. Black-dilligaf?

Building my stock back up and building models again!

Posts: 25,777

Workspaces, Collections and stuff Oct 19, 2008 0:56:38 GMT -5

Quote

Post by RodBurNeR on Oct 19, 2008 0:56:38 GMT -5

I am pretty much done. Some stuff to put away yet. My bench already has the '25 coupe on it, chassis in paint booth downstairs! If you look through the link, you can see more of the room etc.. the dresser is my treasure chest. It is full of old builds from the 60s that will eventually get new life like the '25 i am working on. I love stuff that you don't see everyday

public.fotki.com/drasticplasticsmcc/1/2/hobby-room--collection/hobby-room-moved-up/

Hosted on Fotki

Last Edit: Oct 19, 2008 0:57:30 GMT -5 by RodBurNeR

Bob Black
He's a pedantic, pontificating, pretentious bastard, a belligerent old fart, a worthless steaming pile of cow dung, figuratively speaking.
MKIBA Archives here
public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/

HotRodTom
Greaser

Bald Headed "Slick"

For those who fought for it, FREEDOM has a taste that the protected will never know.

Posts: 1,655

Workspaces, Collections and stuff Oct 19, 2008 1:16:19 GMT -5

Quote

Post by HotRodTom on Oct 19, 2008 1:16:19 GMT -5

Bob, that desk is TOO neat, man! I mean, as in "Where is the stuff going on all over the desktop?" too neat. I have about 3 projects spread out on my desktop, and several "other" projects on there as well. Maybe that is one of the things that slows me down when I'm building. Too many distractions to sidetrack me from what I'm working on at the time.

Steve, you got a LOT of projects, my friend! I think I spied a Scool Bus in a couple of pics, and I seen a Pete 377 and several Scania's. The 377 would make an interesting "Hot Rod Deisel" truck. I have seen a few 379 Pete's, but not a 377. Would have to post that one up over on the DPMCC, though.

Gulf I Veteran and PROUD of it! D 1/11th ACR (Fulda gap/Kuwait) HHT 1/18th Inf (M) 3/24th Combat Inf Bde. (M)Ft. Benning/Kuwait

RodBurNeR TRaKMaster Rev. Mr. Black-dilligaf? Building my stock back up and building models again! Posts: 25,777	Workspaces, Collections and stuff Oct 19, 2008 1:19:29 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by RodBurNeR on Oct 19, 2008 1:19:29 GMT -5 Tom, it will get messy give me a couple months hehe
	Bob Black He's a pedantic, pontificating, pretentious bastard, a belligerent old fart, a worthless steaming pile of cow dung, figuratively speaking. MKIBA Archives here public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/

Oldsklmike Hoodlum Posts: 225	Workspaces, Collections and stuff Oct 26, 2008 16:07:20 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Oldsklmike on Oct 26, 2008 16:07:20 GMT -5 I just spent some time expanding my model room. Added some more shelves, book case and a inspiration wall. Also cleaned and reorganized the bench.. Now its time to get that ford truck painted.. Later
	Last Edit: Oct 26, 2008 16:10:07 GMT -5 by Oldsklmike Mike Dube CPMCC - VP s223.photobucket.com/albums/dd211/Oldsklhombre/

woodandbike Greaser Prince Drops-a-Lot Build em and drive em Posts: 1,624	Workspaces, Collections and stuff Oct 26, 2008 16:18:42 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by woodandbike on Oct 26, 2008 16:18:42 GMT -5 Very nice space.I like the Weesner prints you have on the wall.
	Dan Robinson I prefer "Dano"

RodBurNeR TRaKMaster Rev. Mr. Black-dilligaf? Building my stock back up and building models again! Posts: 25,777	Workspaces, Collections and stuff Oct 26, 2008 16:31:22 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by RodBurNeR on Oct 26, 2008 16:31:22 GMT -5 that's nice Mike, looks comfy!
	Bob Black He's a pedantic, pontificating, pretentious bastard, a belligerent old fart, a worthless steaming pile of cow dung, figuratively speaking. MKIBA Archives here public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/

gmckid
Greaser

TRAKOHOLIC

LOCAL HERO

Posts: 1,921

Workspaces, Collections and stuff Dec 21, 2008 20:46:26 GMT -5

Quote

Post by gmckid on Dec 21, 2008 20:46:26 GMT -5

What started as a little tidying up today turned into a complete overhaul of my work area that lasted 5 hours. I havent completely cleaned it in years. Today i went through everything, its kind of cluttery, but i like it that way, you should have seen it before!
Now i have a lot more room to build on, and everything is more accesible (not covered in junk)
so how long do you guys figure it will be before its messed up again lol.

"Hitting it with a rock wouldn't hurt you, rocks aren't conducive to electricity."
Kyle Carter

Koolkat Greaser "The DON" of Kustom & Hot Rod Models Mag I was kustom when kustom wasn't kool! Posts: 2,272	Workspaces, Collections and stuff Dec 22, 2008 0:52:45 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Koolkat on Dec 22, 2008 0:52:45 GMT -5 Here's a small part of my work area, and a little bit of display area. These were taken a couple years ago, much more crowded now, and the workbench is much messier!
	'Von' Don Graham (koolkat)

RodBurNeR TRaKMaster Rev. Mr. Black-dilligaf? Building my stock back up and building models again! Posts: 25,777	Workspaces, Collections and stuff Dec 22, 2008 1:15:39 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by RodBurNeR on Dec 22, 2008 1:15:39 GMT -5 damn Don! have enough parts drawers? hehe nice mess ya got there, makes me wanna move in!
	Bob Black He's a pedantic, pontificating, pretentious bastard, a belligerent old fart, a worthless steaming pile of cow dung, figuratively speaking. MKIBA Archives here public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/

Koolkat
Greaser

"The DON" of Kustom & Hot Rod Models Mag

I was kustom when kustom wasn't kool!

Posts: 2,272

Workspaces, Collections and stuff Dec 22, 2008 4:04:06 GMT -5

Quote

Post by Koolkat on Dec 22, 2008 4:04:06 GMT -5

Dec 22, 2008 1:15:39 GMT -5 RodBurNeR said:

damn Don! have enough parts drawers? hehe nice mess ya got there, makes me wanna move in!

No, I didn't. I have more now.

You've only seen a smidgen of it here. 15x15 L shaped room, plus one side of the garage is FULL, That's the work area.

Display area is also - well, in other rooms besides the 'model room/shop. But, not in HER rooms! :'(

'Von' Don Graham (koolkat)

RodBurNeR
TRaKMaster

Rev. Mr. Black-dilligaf?

Building my stock back up and building models again!

Posts: 25,777

Workspaces, Collections and stuff Dec 22, 2008 4:08:43 GMT -5

Quote

Post by RodBurNeR on Dec 22, 2008 4:08:43 GMT -5

Dec 22, 2008 4:04:06 GMT -5 Koolkat said:

Dec 22, 2008 1:15:39 GMT -5 RodBurNeR said:

damn Don! have enough parts drawers? hehe nice mess ya got there, makes me wanna move in!

No, I didn't. I have more now.

You've only seen a smidgen of it here. 15x15 L shaped room, plus one side of the garage is FULL, That's the work area.

Display area is also - well, in other rooms besides the 'model room/shop. But, not in HER rooms! :'(

Lot's of cool stuff in there I'm sure! My "HER" actually wanted me to put my display in the livingroom to keep it from getting ruined haha! I said "do you actually want my models in the livingroom?" she changed her tune.....

Bob Black
He's a pedantic, pontificating, pretentious bastard, a belligerent old fart, a worthless steaming pile of cow dung, figuratively speaking.
MKIBA Archives here
public.fotki.com/drasticplasticsmcc/mkiba-build-under-c/

Dub
Greaser

TRAKWHORE

Posts: 1,062

Workspaces, Collections and stuff Feb 24, 2009 21:00:15 GMT -5

Quote

Post by Dub on Feb 24, 2009 21:00:15 GMT -5

I got a new desk so I did a revamp of the building area.

Here's what I started out with:

Here's where the old desk now lives, which is the hallway leading to the room with the bench. I have a window right next to it and plan to modify it to be my paint booth.

...and here is the new desk!

It's quite a bit bigger than the old one. I do like the extra room to stretch out. It sure helped me keep a clear head today to get the frame built for the French Bucket I'm working on. That chair with the old desk is the original and its getting thrown out because its broken and too small to be comfortable any more. (Its my set from when I was a kid...) Next is to start gathering parts to convert the old one to a spray booth! ;D

Jonathan Lutz
CPMCC ...and a MAMA's boy too!

My nickname was Dub before those farging 20 inch wheel companies stole it...

It needs to be weet srooder, don't let it bist you.

I spent the last 33 years worrying about what others thought of me. NOT ANYMORE!

roddratt Guest	Workspaces, Collections and stuff Feb 24, 2009 22:22:53 GMT -5 Quote Select Post Deselect Post Link to Post Back to Top Post by roddratt on Feb 24, 2009 22:22:53 GMT -5 Looks like a cool new home, DUb. I expect that new desk to piled high with parts n shit in no time, dive in!

mamaprez Greaser Old Man River "If I knew I would live this long, I would have taken better care of myself." - Mickey Mantle Posts: 1,573	Workspaces, Collections and stuff Mar 2, 2009 15:23:24 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by mamaprez on Mar 2, 2009 15:23:24 GMT -5 New pics of the man-cave,,,,,,,,, I cleaned up the modelling desk A LITTLE,,,,,,,first time since moving into this house in 1994 ! Maybe now i should clean up the rest of the crap,,,,,,,,,nah.
	Lyle Willits CAR MODELERS OR TERRORIST GROUP - YOU DECIDE!