|
Post by bobss396 on Feb 25, 2008 20:38:59 GMT -5
|
|
|
Post by RodBurNeR on Feb 25, 2008 20:58:58 GMT -5
man you NEED to finish this! is it gonna sit low?
|
|
|
Post by bobss396 on Feb 25, 2008 21:43:08 GMT -5
Thanks, it will sit lower in the front, used the dropped axle up front and kept the rear stock.
|
|
|
Post by frank on Feb 25, 2008 21:44:02 GMT -5
WOW, can't wait to see this one finished.
|
|
|
Post by RodBurNeR on Feb 25, 2008 22:04:28 GMT -5
Thanks, it will sit lower in the front, used the dropped axle up front and kept the rear stock. . that will be sharp!
|
|
|
Post by racer13 on Feb 25, 2008 23:02:15 GMT -5
just plain Beautiful
|
|
|
Post by Duane on Feb 26, 2008 0:23:16 GMT -5
NIIICE work Bob !!!! your '40 is GORGEOUS !!!!
|
|
|
Post by geezerman on Feb 26, 2008 6:32:12 GMT -5
Man, That is KLEEN !!! Great detail stuff on the firewall. Super fine work.
|
|
|
Post by modeler on Feb 26, 2008 13:06:34 GMT -5
Your 40 turned into a deluxe sure looks better that the one I attemped. I cut at the rear of the fenders, not the place to cut. I had thought maybe around grille, but thought that would be too diff., wrong. Did finally finish, putting Deluxe on coupe and standard on convert., but I have a feeling neither will turn out as clean as your coupe. Looks great.
|
|
|
Post by bobss396 on Feb 26, 2008 13:29:38 GMT -5
Your 40 turned into a deluxe sure looks better that the one I attemped. I cut at the rear of the fenders, not the place to cut. I had thought maybe around grille, but thought that would be too diff., wrong. Did finally finish, putting Deluxe on coupe and standard on convert., but I have a feeling neither will turn out as clean as your coupe. Looks great. Thanks for the compliments. I cut the whole grille area out of the convertible kit, had to do some fitting and used the convertible hood too. Which had to be widened at the back and re-sculpted to meet the fenders for a good fit. I'm stuck on the BMF around the windshield and a couple of minor items but should have it at the NNL East. Bob
|
|
|
Post by modeler on Feb 27, 2008 16:44:20 GMT -5
That 40 is lookin' good, Made the trim rings, you guys are way outa' my league,. Or maybe I'm not even in the game. I just kept trimin' and bending to get the hood to fit grille seems to fit okay. If I ever get them back out there will be a putty fest. Looks like it's goin together great. And really dig the colors.
|
|